LED Controls

The role of the LED driver is critical to successful LED controls implementation as it can facilitate deployment of different technologies, enable solutions and provide protection of low voltage controls from the AC source. Inventronics offers a complete LED controls solution by providing Controls-Ready LED drivers and several network interface modules that are compatible with a vast array of lighting control networks. Our compatibility with Synapse, Zigbee, Autauni and DMX/RDM allows you to use various dimmers, switches, relays and lighting management software systems to find the ideal control solution for you lighting application needs. By pairing our control modules with our Controls-Ready drivers, you can eliminate the need for an AC switch or relay. By removing these devices, the installation is less bulky, has fewer points of failure and provides more design flexibility. Our multiple LED controls solutions will greatly simplify assembly for both the manufacturer and the electrician and allows a cost-optimized fixture design ready for any input.

The CNV-DMXR converts DMX signal to a 0-10V dimming signal. It complies with both DMX RDM and Traditional DMX networks. It uses the LED driver's Dim-to-Off capability to eliminate the AC Switch or Relay and is powered by the 12Vdc with a simple 3-wire connection to the driver.
Signal Input: DMX RDM or DMX 512
IP Rating: IP67
The CNV-SNAP-AN0 wireless network interface module that enables one or more Inventronics LED drivers to be controlled by Synapse Lighting Control networks. It uses the Dim-to-Off capability of Inventronics LED drivers along with their always-on auxiliary power to provide wireless connectivity at the lowest system cost. Its compact design and flexible deployment options make it ideal for both indoor and outdoor lighting systems and a wide array of luminaires.
Signal Input: Synapse
IP Rating: IP66
The CNV-ZIGB is a wireless dimming signal converter that enables one or more Inventronics LED drivers to be controlled by the Daintree Networks® ControlScope® building control solution. Using the CNV-ZIGB with other interoperable Daintree devices, Control
Signal Input: Daintree
IP Rating: N/A
DALI to 0-10v Converter.
Signal Input: DALI
IP Rating: IP66
The TDD-ANFN-xxxx Dimmer is designed to work with 0-10V dimmable LED driver. The standard features include programmable dimming control, programmable soft start, factory setting and accurate time delay etc.
Signal Input: N/A
IP Rating: IP67
The TDD-ANPNx Dimmer is designed to work with 0-10V dimmable LED driver. The standard features include programmable dimming control, factory setting and accurate calibration etc.
Signal Input: PWM, Programmable Internal Timer
IP Rating: IP66