LED Lighting Control Systems - Inventronics

Inventronics network interface modules paired with our Controls-Ready LED drivers provides the optimal LED lighting control system. The modules utilize the Dim-to-Off capability of the Inventronics Controls-Ready drivers along with their always-on auxiliary power to provide wireless connectivity at the lowest system cost. They are also compatible with a wide range of lighting control networks such as Daintree, Autani, DMX-RDM and Synapse. Our LED lighting controls system portfolio is ideal for new buildings and retrofits and provide easy configuration, reduced installation costs and easy-to-use commissioning tools.

CDD-CNPN

This product has been discontinued The CSIM (Control Signal Integrating Module) is designed to integrate multiple signals (Dimmer, Occupancy Sensor, Ambient Light Sensor, RNTC, Remote control, Output Lumen Compensation, etc) into a 0-10V analog output and a

Signal Input: Multiple Input

IP Rating: N/A

CNV-DMXR

The CNV-DMXR converts DMX signal to a 0-10V dimming signal. It complies with both DMX RDM and Traditional DMX networks. It uses the LED driver's Dim-to-Off capability to eliminate the AC Switch or Relay and is powered by the 12Vdc with a simple 3-wire connection to the driver.

Signal Input: DMX RDM or DMX 512

IP Rating: IP67

CNV-SNAP-AN0

The CNV-SNAP-AN0 wireless network interface module that enables one or more Inventronics LED drivers to be controlled by Synapse Lighting Control networks. It uses the Dim-to-Off capability of Inventronics LED drivers along with their always-on auxiliary power to provide wireless connectivity at the lowest system cost. Its compact design and flexible deployment options make it ideal for both indoor and outdoor lighting systems and a wide array of luminaires.

Signal Input: Synapse

IP Rating: IP66

CNV-ZIGB

The CNV-ZIGB is a wireless dimming signal converter that enables one or more Inventronics LED drivers to be controlled by the Daintree Networks® ControlScope® building control solution. Using the CNV-ZIGB with other interoperable Daintree devices, Control

Signal Input: Daintree

IP Rating: N/A

EBS-040SxxxBTE

The EBS-040SxxxBTE series is suitable for global use (except North America). They consist of 40W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 40 W

Current Range: .45-1.05A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: DALI, AC Dim, Multiple Timers

EBS-040SxxxDTE

The EBS-040SxxxDTE series is suitable for global use (except North America). They consist of 40W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 40 W

Current Range: .45-1.05A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: 0 - 10V, PWM, Multiple Timers

EBS-080SxxxBT2

The EBS-080SxxxBT2 series is suitable for global use (except North America). They consist of 80W, DALI-2 D4i certified, IP20 LED drivers that operate from 176-305Vac. They provide wireless programming via NFC, are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 80 W

Current Range: .45-1.50 A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: DALI-2, D4i, AC Dim, Multiple Timers

EBS-080SxxxBTE

The EBS-080SxxxBTE series is suitable for global use (except North America). They consist of 80W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 80 W

Current Range: .45-1.05A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: DALI, AC Dim, Multiple Timers

EBS-080SxxxDTE

The EBS-080SxxxDTE series is suitable for global use (except North America). They consist of 80W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 80 W

Current Range: .45-1.05A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: 0 - 10V, PWM, Multiple Timers

EBS-120SxxxBTE

The EBS-120SxxxBTE series is suitable for global use (except North America). They consist of 120W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 120 W

Current Range: 0.5-1.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: DALI, AC Dim, Multiple Timers

EBS-120SxxxDTE

The EBS-120SxxxDTE series is suitable for global use (except North America). They consist of 120W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 120 W

Current Range: 0.5-1.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: 0 - 10V, PWM, Multiple Timers

EBS-160SxxxBTE

The EBS-160SxxxBTE series is suitable for global use (except North America). They consist of 160W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 160 W

Current Range: .45-1.05A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: DALI, AC Dim, Multiple Timers

EBS-160SxxxDTE

The EBS-160SxxxDTE series is suitable for global use (except North America). They consist of 160W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Power Level: 160 W

Current Range: .45-1.05A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP20

Dimming: 0 - 10V, PWM, Multiple Timers

EFD-1K2SxxxDT

The Ultra-high-powered EFD-1K2SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance while eliminating the need for a multiple driver design. They operate from 180-528Vac and provide the full 1200W at a wide output current range. They are designed to provide high power solutions and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications.

Power Level: 1200 W

Current Range: 3.36-7.4A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: Isolated 0 - 10V, PWM, Multiple Timers

EFD-1K2SxxxDV

The Ultra-high-powered EFD-1K2SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance while eliminating the need for a multiple driver design. They operate from 180-528Vac and provide the full 1200W at a wide output current range. They are designed to provide high power solutions and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications.

Power Level: 1200 W

Current Range: 3.36 - 7.4 A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: Isolated 0 - 10V, PWM, Multiple Timers

ESD-096SxxxDT

The ESD-096SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 249-528Vac and provide 96W at a wide output current range. They are ideal for low bay, area and street lighting applications.

Power Level: 96

Current Range: 0.45-3.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

ESD-150SxxxDT

The ESD-150SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 249-528Vac and provide 150W at a wide output current range. They are ideal for high bay, tunnel, and roadway lighting applications.

Power Level: 150

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

ESD-240SxxxDT

The ESD-240SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 249-528Vac and provide 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 240W

Current Range: 0.7-6.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

ESD-320SxxxDT

The ESD-320SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 249-528Vac and provide 320W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 320 A

Current Range: 1.05-6.2A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

ESD-600SxxxDT

The ESD-600SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 249-528Vac and provide 600W at a wide output current range. They are ideal for high mast, entertainment, horticulture, aquaculture and other high-power lighting applications. The ESD-600 series is a great option to replace multiple lower wattage drivers.

Power Level: 600 W

Current Range: 1.36 - 12.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

ESD-600SxxxDV

The ESD-600SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 249-528Vac and provide 600W at a wide output current range. They are ideal for high mast, entertainment, horticulture, aquaculture and other high-power lighting applications. The ESD-600 series is a great option to replace multiple lower wattage drivers.

Power Level: 600 W

Current Range: 1.36-12.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-075SxxxBT

The DALI-certified EUD-075SxxxBT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 75 W

Current Range: 0.45-2.8A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-075SxxxBV

The DALI-certified EUD-075SxxxBV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 75 W

Current Range: 0.45-2.8A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-075SxxxDT

The EUD-075SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 75 W

Current Range: 0.45-2.8A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-075SxxxDV

The EUD-075SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 75 W

Current Range: 0.45-2.8A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-096SxxxBT

The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 96 W

Current Range: 0.45-3.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-096SxxxBTA

The 2nd Generation, DALI-certified EUD-096SxxxBTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications.

Power Level: 96 W

Current Range: 0.45-3.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-096SxxxBV

The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 96 W

Current Range: 0.45-3.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-096SxxxBVA

The 2nd Generation, DALI-certified EUD-096SxxxBVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications.

Power Level: 96 W

Current Range: 0.45-3.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-096SxxxDT

The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 96 W

Current Range: 0.45-3.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-096SxxxDTA

The 2nd Generation EUD-096SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications.

Power Level: 96 W

Current Range: 0.45-3.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-096SxxxDTL

The EUD-096SxxxDTL series is suitable for North American use. They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 96W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 96 W

Current Range: 0.45-3.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-096SxxxDV

The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 96 W

Current Range: 0.45-3.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-096SxxxDVA

The 2nd Generation EUD-096SxxxDVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications.

Power Level: 96 W

Current Range: 0.45-3.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-096SxxxDVL

The EUD-096SxxxDVL series is suitable for global use (except North America). They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 96W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 96 W

Current Range: 0.45-3.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-100SxxxDD

The EUD-100SxxxDD series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance.They provide Class II, double insulation and operate from 90-305Vac while delivering the full 100W at a wide output current range. They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 100 W

Current Range: 0.7-2.1A

Surge: 10 kV DM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-150SxxxBT

The EUD-150SxxxBT is currently listed under Limited Availability. Instead, please see the improved features of the EUD-150SxxxBTA series. The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 150 W

Current Range: 0.65-5.2A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-150SxxxBTA

The 2nd Generation, DALI-certified EUD-150SxxxBTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 150 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI

EUD-150SxxxBVA

The 2nd Generation, DALI-certified EUD-0150SxxxBVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 150 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI

EUD-150SxxxDDA

The EUD-150SxxxDDA is not recommended for new design.The 2nd Generation EUD-150SxxxDDA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They provide Class II, double insulation and operate from 90-305Vac while delivering the full 150W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 150 W

Current Range: 0.7-2.1A

Surge: 10 kV DM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-150SxxxDT

The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 150 W

Current Range: 0.65-5.2A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-150SxxxDTA

The 2nd Generation EUD-150SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for highbay, tunnel and street lighting applications.

Power Level: 150 W

Current Range: 0.7-5.6A

Surge: DM 6 kV, CM 10 kV

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-150SxxxDTL

The EUD-150SxxxDTL series is suitable for North American use. They really are in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 150W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 150 W

Current Range: 0.45-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-150SxxxDV

The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 150 W

Current Range: 0.65-5.2A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-150SxxxDVA

The 2nd Generation EUD-150SxxxDVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 150 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-150SxxxDVL

The EUD-150SxxxDVL series is suitable for global use (except North America). They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 150W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

Power Level: 150 W

Current Range: 0.45-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-200SxxxBD

The EUD-200SxxxBD is not recommended for new design.The DALI-certified EUD-200SxxxBD series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They provide Class II, double insulation and operate from 90-305Vac while delivering the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 200 W

Current Range: 0.7-1.5A

Surge: 6 kV DM

IP Rating: IP67

Dimming: DALI

EUD-200SxxxBT

This series has been discontinued. Instead, please see the improved features of the EUD-200SxxxBTA series. The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-200SxxxBTA

The 2nd Generation, DALI-certified EUD-200SxxxBTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 200 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-200SxxxBV

This series has been discontinued. Instead, please see the improved features of the EUD-200SxxxBVA series. The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-200SxxxBVA

The 2nd Generation, DALI-certified EUD-200SxxxBVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 200 W

Current Range: 0.7-5.6 A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-200SxxxDD

The EUD-200SxxxDD is not recommended for new design. The EUD-200SxxxDD series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They provide Class II, double insulation and operate from 90-305Vac while delivering the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 200 W

Current Range: 0.7-1.5A

Surge: 6 kV DM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-200SxxxDT

The EUD-200SxxxDT is not recommended for new design. Instead, please see the EUM-200SxxxLT or EUD-200SxxxDTA series.The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-200SxxxDT(ST)-00A0

The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V

EUD-200SxxxDTA

The 2nd Generation EUD-200SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-200SxxxDV

The EUD-200SxxxDV is not recommended for new design. Instead, please see the EUM-200SxxxLG or EUD-200SxxxDVA series.The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications..

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-200SxxxDV(SV)-00A0

The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and are ideal for high bay, high mast, arena and roadway lighting applications..

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V

EUD-200SxxxDVA

The 2nd Generation EUD-200SxxxDVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-200SxxxGT

This series has been discontinued. Instead, please see the improved features of the EUD-200SxxxDTA paired with our CNV-DMXR. The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for arena, theatrical and architectural lighting applications.

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DMX512

EUD-200SxxxGV

This series has been discontinued. Instead, please see the improved features of the EUD-200SxxxDVA paired with our CNV-DMXR. The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for arena, theatrical and architectural lighting applications.

Power Level: 200 W

Current Range: 0.7-4.9A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DMX512

EUD-240SxxxBT

The EUD-240SxxxBT is currently listed under Limited Availability. Instead, please see the EUM-240SxxxBT or EUD-240SxxxBTA series.The DALI-certified EUD-240SxxxBT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 240 W

Current Range: 0.7-6.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-240SxxxBTA

The 2nd Generation, DALI-certified EUD-240SxxxBTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 240 W

Current Range: 0.7 - 6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-240SxxxBV

The EUD-240SxxxBV series is currently listed under Limited Availability. Instead, please see the EUM-240SxxxBG or EUD-240SxxxBVA series as a replacement.The DALI-certified, EUD-240SxxxBV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 240 W

Current Range: 0.7-6.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: DALI

EUD-240SxxxBVA

The 2nd Generation, DALI-certified EUD-240SxxxBVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, tunnel and street lighting applications.

Power Level: 240 W

Current Range: 0.7 - 6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-240SxxxDT

The EUD-240SxxxDT is not recommended for new design. Instead, please see the EUD-240SxxxDTA series.This series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications. Product maturity for this series allowed us to improve on our design.

Power Level: 240 W

Current Range: 0.7-6.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-240SxxxDTA

The 2nd Generation EUD-240SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 240 W

Current Range: 0.7-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-240SxxxDTL

The EUD-240SxxxDTL series is suitable for North American use. They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 240W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, high mast, arena and roadway lighting.

Power Level: 240 W

Current Range: 0.7-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-240SxxxDV

The EUD-240SxxxDV is not recommended for new design. Instead, please see the EUD-240SxxxDVA series.This series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 240 W

Current Range: 0.7-6.6A

Surge: 4 kV DM, 6 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Traditional Timer

EUD-240SxxxDVA

The 2nd Generation EUD-240SxxxDVA is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

Power Level: 240 W

Current Range: 0.7-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-240SxxxDVL

The EUD-240SxxxDVL series is suitable for global use (except North America). They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 240W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, high mast, arena and roadway lighting.

Power Level: 240 W

Current Range: 0.7-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-320SxxxBT

The DALI-certified EUD-320SxxxBT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 320W at a wide output current range. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 320 W

Current Range: 1.05-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-320SxxxBV

The DALI-certified EUD-320SxxxBV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 320W at a wide output current range. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 320 W

Current Range: 1.05-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-320SxxxDT

The EUD-320SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 320W at a wide output current range. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 320 W

Current Range: 1.05-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-320SxxxDV

The EUD-320SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 320W at a wide output current range. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 320 W

Current Range: 1.05-6.7A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-480SxxxDT

The EUD-480SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 480W at a wide output current range from 1.4-10A. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 480 W

Current Range: 1.05-10.0A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-480SxxxDV

The EUD-480SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 480W at a wide output current range from 1.05-10.0A. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 480 W

Current Range: 1.05-10.0 A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: 0 - 10V, PWM, Multiple Timers

EUD-600SxxxBT

The high-powered EUD-600SxxxBT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are DALI-certified and designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 600W at a wide output current range. They are designed to address high power solutions by replacing multiple lower wattage drivers and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 600 W

Current Range: 1.10-9.8A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-600SxxxBV

The high-powered EUD-600SxxxBV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are DALI-certified and designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 600W at a wide output current range. They are designed to address high power solutions by replacing multiple lower wattage drivers and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 600 W

Current Range: 1.10-9.8A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: DALI, Multiple Timers

EUD-600SxxxDT

The high-powered EUD-600SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 600W at a wide output current range. They are designed to address high power solutions by replacing multiple lower wattage drivers and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 600 W

Current Range: 1.10 - 12.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: Isolated 0 - 10V, PWM, Multiple Timers

EUD-600SxxxDV

The high-powered EUD-600SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 600W at a wide output current range. They are designed to address high power solutions by replacing multiple lower wattage drivers and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

Power Level: 600 W

Current Range: 1.1-12.5A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP67

Dimming: Isolated 0 - 10V, PWM, Multiple Timers

EUM-200SxxxLG

The EUM-200SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP66/IP67

Dimming: Isolated 0 - 10V, PWM, Multiple Timers, Digital Dimming

EUM-200SxxxLT

The EUM-200SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast and roadway lighting applications.

Power Level: 200 W

Current Range: 0.7-5.6A

Surge: 6 kV DM, 10 kV CM

IP Rating: IP66/IP67

Dimming: Isolated 0 - 10V, PWM, Multiple Timers, Digital Dimming

LBD-075SxxxBSF

The DALI-certified LBD-075SxxxBSF series is suitable for global use (except North America). They consist of Controls-Ready, Programmable IP20 LED drivers that offer enhanced features for a top-of-line performance. They operate from 176-305Vac and deliver the full 75W at a wide range of output currents. They are ideal for panel and linear lighting applications.

Power Level: 75 W

Current Range: 0.7 - 2.1A

Surge: 1 kV DM

IP Rating: 20

Dimming: DALI, Push Dimming

LUD-040SxxxBSF

The DALI-certified LUD-040SxxxBSF series is suitable for North American use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 40W at a wide output current range. They are ideal for dimmable panel and linear lighting applications.

Power Level: 40 W

Current Range: .35-1.5A

Surge: 1 kV DM

IP Rating: IP20

Dimming: DALI, Push Dimming

LUD-040SxxxDSF

The LUD-040SxxxDSF series is suitable for North American use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 40W at a wide output current range. They are ideal for dimmable panel and linear lighting applications.

Power Level: 40 W

Current Range: .35-1.5A

Surge: 1 kV DM

IP Rating: IP20

Dimming: 0 - 10V, PWM, Traditional Timer

LUD-060SxxxBS2

The 2nd Generation LUD-060SxxxBS2 series is suitable for North American use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 60W at a wide output current range. They are ideal for dimmable panel and linear lighting applications.

Power Level: 60 W

Current Range: .385-2.1A

Surge: 1 kV DM

IP Rating: IP20

Dimming: DALI, Push Dimming

LUD-060SxxxBSF

This series is not recommended for new design. Instead, please see the updated features of the the LUD-060SxxxBS2.The DALI-certified LUD-060SxxxBSF series is suitable for North American use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 60W at a wide output current range. They are ideal for dimmable panel and linear lighting applications.

Power Level: 60 W

Current Range: .385-2.1A

Surge: 1 kV DM

IP Rating: IP20

Dimming: DALI

LUD-060SxxxDS2

The 2nd Generation LUD-060SxxxDS2 series is suitable for North American use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 60W at a wide output current range. They are ideal for dimmable panel and linear lighting applications.

Power Level: 60 W

Current Range: .385-2.1A

Surge: 1 kV DM

IP Rating: IP20

Dimming: 0 - 10V, PWM, Multiple Timers

LUD-060SxxxDSF

This series is not recommended for new design. Instead, please see the updated features of the LUD-060SxxxDS2. The LUD-060SxxxDSF series is suitable for North American use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 60W at a wide output current range. They are ideal for dimmable panel and linear lighting applications.

Power Level: 60 W

Current Range: .385-2.1A

Surge: 1 kV DM

IP Rating: IP20

Dimming: 0 - 10V, PWM

SDD-ADFNx

DALI to 0-10v Converter.

Signal Input: DALI

IP Rating: IP66

TDD-ANFN-xxxx

The TDD-ANFN-xxxx Dimmer is designed to work with 0-10V dimmable LED driver. The standard features include programmable dimming control, programmable soft start, factory setting and accurate time delay etc.

Signal Input: N/A

IP Rating: IP67

TDD-ANPNx

The TDD-ANPNx Dimmer is designed to work with 0-10V dimmable LED driver. The standard features include programmable dimming control, factory setting and accurate calibration etc.

Signal Input: PWM, Programmable Internal Timer

IP Rating: IP66

View All LED Lighting Control Systems