Controls

This product has been discontinued The CSIM (Control Signal Integrating Module) is designed to integrate multiple signals (Dimmer, Occupancy Sensor, Ambient Light Sensor, RNTC, Remote control, Output Lumen Compensation, etc) into a 0-10V analog output and a

The CNV-DMXR converts DMX signal to a 0-10V dimming signal. It complies with both DMX RDM and Traditional DMX networks. It uses the LED driver's Dim-to-Off capability to eliminate the AC Switch or Relay and is powered by the 12Vdc with a simple 3-wire connection to the driver.

The CNV-SNAP-AN0 wireless network interface module that enables one or more Inventronics LED drivers to be controlled by Synapse Lighting Control networks. It uses the Dim-to-Off capability of Inventronics LED drivers along with their always-on auxiliary power to provide wireless connectivity at the lowest system cost. Its compact design and flexible deployment options make it ideal for both indoor and outdoor lighting systems and a wide array of luminaires.

The CNV-SNAP-DD2 wireless network interface module enables one or more Inventronics LED drivers to be controlled by Synapse Lighting Control networks. It is DALI-2 D4i compatible allowing for the ability to read information from Inventronics D4i certified LED drivers. Also included is a 0-10V dimming interface to allow for use with Inventronics Controls-Ready drivers. It is ideal for high bay, stadium, horticulture, mast and area lighting.

This product has been discontinued The CNV-ZIGB is a wireless dimming signal converter that enables one or more Inventronics LED drivers to be controlled by the Daintree Networks® ControlScope® building control solution. Using the CNV-ZIGB with other interoperable Daintree devices, Control

The DBV-002S024SS is a DC-DC converter which operates from a 9-15Vdc input range and a 24Vdc output. It's designed to be compatible with Inventronics DALI drivers. It can be used to convert 12V auxiliary power drivers to 24V to facilitate applications that require 24V auxiliary power.

This product has been discontinuedThe SDD-AAPNx works with Inventronics 0-10v dimmable drivers and is used to limit the maximum current output of the driver. Current limiting is accomplished by allowing the user to program a maximum 0-10v dim voltage.

DALI to 0-10v Converter.

This product has been discontinued. The SDD-APFNx converts a PWM signal to 0-10V signal. The output is relative to PWM duty cycle. The output is not related to the amplitude of PWM signal.

The TDD-ANFN-xxxx has been discontinued. The TDD-ANFN-xxxx Dimmer is designed to work with 0-10V dimmable LED driver. The standard features include programmable dimming control, programmable soft start, factory setting and accurate time delay etc.