EUD-200SxxxDT Controls Ready Outdoor LED Driver
  • DT: Programmable at the full 200W Power
  • ST: Programmable with Derating power
  • Controls-Ready: (DT Models Only)
    • Always-On Auxiliary Power: 12V, 200mA
    • Dim-to-Off with Low Standby Power
  • Dimming Controls:
    • DT: 0-10V, PWM, Traditional Timer
    • ST: Non-Dimming
  • Input Surge Protection:
    • 4kV DM, 6kV CM
  • SELV Output
  • TYPE HL, for use in a Class I, Division 2 Hazardous (Classified) Locations
  • 5 Year Warranty

 

Life Time

120,000 hours @ Case Temperatue 60°C

Dimensions

Inches (L x W x H)
8.82 x 2.66 x 1.56

Millimeters (L x W x H)
224 x 67.5 x 39.5

Certifications

Output CurrentInput Voltage RangeOutput Voltage RangeMax. Output PowerModel Number
700 mA

90 ~ 305 Vac
127 ~ 300 Vdc

142 – 286 Vdc

200 W

EUD-200S070DT(ST)-00A0
1050 mA95 – 190 VdcEUD-200S105DT(ST)-00A0
1400 mA71 – 142 VdcEUD-200S140DT(ST)-00A0
2100 mA47 – 95 VdcEUD-200S210DT(ST)-00A0
2450 mA41 – 82 VdcEUD-200S245DT(ST)-00A0
2800 mA35 – 71 VdcEUD-200S280DT(ST)-00A0
4200 mA24 – 48 VdcEUD-200S420DT(ST)-00A0
4900 mA21 – 41 VdcEUD-200S490DT(ST)-00A0
File Name
LED Driver Installation Instructions (Updated March 2015)
LED Driver Installation Guideline (Updated September 2018)
Programming Interface Device Driver Install First (Updated March 2015)
Design-In Guide for Programmable Drivers (Updated September 2018)
Programming Interface Installation Instructions (Updated April 2015)
Programming Interface Operating Instructions (Updated January 2016)
Inventronics Constant Power Programmer Manual Instruction (Updated April 2018)